YT4L-BS Varta

  If You Are Unsure what battery you need you can use the

MotorBIke Battery Cross-Refrence Guide Please Note this is for guidence only, it is still recommended that you check the battery matches the battery on the vehicle before purchase

Check your existing battery before purchase, We have this motorbike battery listed for for following motorbikes

This is one of the most common sealed moped and low cc engined bike batteries

BSV GP Dio 50 cc

BSV ZX 50 cc 1994 - 1995

Cagiva City, Lucky, Explorer 50 cc 1994 - 1997

Cagiva Cucciolo, Mito 50 cc 1998

Cagiva K3 / W4 1991 - 1998

Cagiva 125 K7

Fantic 50 cc - 80 cc Grinter, Koala, Leader

Honda AF29 (Vision) 50 cc

Honda Dio 50cc 1993 - 1994

Honda NB 50cc 1983 - 1987

Honda  NB50M 1983 - 1987

Honda NQ 1986 - 1987

 And Many Many more.                                                      

This Battery is also fitted on some Suzuki, Honda, Kawasaki and Yamaha Motorbikes.   

SPECIAL OFFER : FREE CARRIAGE to England and Wales.

Varta YT4L-BS Sealed Motorcycle Battery.

Voltagte : 12 V

Capacity : 3 Ah

Type : Commonly Called a Sealed, Gel, Dry

Dimentions : 114mm x 71mm x 86mm

Equilivalent Part Numbers : YTX4L-BS, CTX4L-BS, 503-014-003

Standard Warranty : 1 Year

This Motorcycle Battery comes with an acid pack and instructions on how to prepare, once the battery is filled it will need to be charged to complete the activation process.

PLEASE CHECK THAT YOU HAVE THE CORRECT BATTERY BEFORE STARTING THE FILLING INSTRUCTIONS, WE CANNOT RETURN / EXCHANGE IF  YOU HAVE THE INCORRECT BATTERY AND HAVE STARTED THE FILLING PROCESS.

FILLING INSTRUCTIONS :

1. Put the battery on to a flat, solid base and remove the foil strip from the battery.

2. Take the acid pack out of the box and the remove the plastic wrap.

3. Remove the Black sealing strip from the top of the Acid Pack and keep it to one side for use later on.

DO NOT REMOVE THE FOIL FROM THE ACID PACK 

4. Press the Acid pack upside down on to the battery cell openings firmly and as far as it will go, the acid will be automaticly disperced to the correct level for each cell.

LEAVE THE BATTERY FOR A 30 MIN PERIOD

5. Remove the Empty Acid Pack and place the black sealer stip over the battery cells, press the black sealer strip down fully, once the battery is Sealed, it will not need to be opened again, doing to so will void any warranty.

6. Once the battery is filled and sealed it will need to be charged on a motorcycle or trickle charger to complete the activation process.

CHARGE ONCE FILLED TO COMPLETE THE ACTIVATION PROCESS