Home > Shop By Brand > Motobatt Motorcycle Batteries

PDC2x2A Motobatt Dual Bank 12v 2.0A Battery Charger

Our Price Inc VAT
Our Price Ex VAT

PDC2x2A Motobatt Dual Bank 12v 2.0A Battery Charger

PDC2X2A Motobatt Maintenence Charger 2 Bank

UK Version with 3 pin UK plug fitted.

Use at home or in the workshop

    12V 2.0A 9 Step Algorithm
    Auto Switching 100-240VAC 50/60Hz
    Max Voltage 14.9V
    Runs 2 Batteries Simultaneously
    Overcharge Protection
    Reverse Polarity Protection
    Short Circuit Protection
    Spark Proof
    72 Hour Safety Timer
    Suggested for 4 to 100AH batteries
    Premium Retail Packaging
    Includes: 2x21" Clip and 2x Eyelet Maintenance leads
    Wall Mountable
    Optional: MBC2B25 with 2x25" extension leads.
    Perfect Option for those with multiple vehicles

Motobatt PDC2X2A 12V 2.0 Amp Dual Bank Charger

2 "Self-Sensing" 9 Step Fully Automatic Chargers
   This Two Station Charger can charge or maintain two separate sized batteries at one time, so your boat, Ski, Mower, Bike Car or RV can stay in premium condition ready to ride or roll.

Motobatt's clever Microprocessor reads the correct voltage of the battery connected, the 9 Phase process monitors the battery resistance 100's of times per second during charging mode.

Qualification Stage checks the battery is over 2V for safety reasons, then transitions to "Rescue" Phase where an arsenal of 5 different recovery modes can be utilised to revive heavily Sulphated or deeply discharged batteries. Generally at this stage unusually high voltage is seen early in the charge cycle, once the rescue phase is done the battery is ready for

Soft Start Phase When the charger detects a low initial state of charge, voltage and current are delivered at a specific rate to assist the battery recovery before entering Pulse charging mode.

Pulse Phase provides a high frequency pulse charge to help the newly recovering battery to accept charge as it enters recondition mode.

Recondition Phase continues to work the battery at a slightly higher voltage and amperage to re-activate the battery plates for improved depth of charge. Now that the battery has been eased back to life.

Bulk charge phase can begin giving constant current to the battery up to about 80% of its capacity.

Absorption Phase begins with constant voltage being supplied while current is reduced. This occurs according to the batteries ability to accept charge up to 100%.

Check Phase is now activated to monitor the batteries ability to hold the charge properly, if not it will cycle back through the entire process for 24 hours or more until it determines the battery cannot be recovered. For revived batteries it then enters

Maintenance Phase where the battery can stay indefinitely connected to the charger. As the battery drops voltage while unused, the unit will activate when needed to ensure a full state of readiness.

Keeping your batteries properly maintained with dramatically Extend working Life

Customer Reviews

To ensure that our reviews are real and relevent we only approve reviews that are written by our customers.

Click here to write an online review for this product.

Be the first to review this product