Home > Motobatt Motorcycle Batteries

PDC4x2A Motobatt Quad Bank 12v 2.0A Battery Charger


Our Price Inc VAT
£139.99
Our Price Ex VAT
£116.66







PDC4x2A Motobatt Quad Bank 12v 2.0A Battery Charger

PDC4x2A Motobatt Quad Bank 12v 2.0A Battery Charger

UK Version with 3 pin UK plug fitted.

Motobatt Maintenence Charger 4 Bank
2 Amp Fully Automatic.

    12V 2.0A per Channel 9 Step Algorithm
    Auto Switching 100-240VAC 50/60 Hz
    Max Voltage 14.9V
    Suggested for 4 to 100AH Batteries
    Short Circuit Protection
    Spark Proof
    72 Hour Safety Timer
    Reverse Polarity Protection
    Temperature Protection
    Battery Recover Mode
    Run 4 Batteries simultaneously
    Premium Retail Packaging
    Includes: 4x21" Clip and 4x Eyelet Maintenance leads
    Wall Mountable
    Optional Extension Leads

Motobatt PDC4X2A 12V 2.0 Amp Quad Bank Charger.

Four Intellegent individual 9 Step Fully Automatic Chargers in one neat and tidy wall mounted unit.

A Killer combination for a workshop or man cave. No more untidy dangerous charging areas, Motobatt' Multi Station chargers make charging a breeze, just plug and leave. No Sparks, fumes or dangerous conditions left unattended.

    Application:
    This Four Station Charger can charge or maintain Four separate sized batteries at one time, so your boat, Ski, Mower, Bike Car or RV can stay in premium condition ready to ride or roll.

 

    Motobatt's clever Microprocessor reads the correct voltage of the battery connected, the 9 Phase process monitors the battery resistance 100's of times per second during charging mode.

Qualification Stage checks the battery is over 2V for safety reasons, then transitions to "Rescue" Phase where an arsenal of 5 different recovery modes can be utilised to revive heavily Sulphated or deeply discharged batteries. Generally at this stage unusually high voltage is seen early in the charge cycle, once the rescue phase is done the battery is ready for

Soft Start Phase When the charger detects a low initial state of charge, voltage and current are delivered at a specific rate to assist the battery recovery before entering Pulse charging mode.

Pulse Phase provides a high frequency pulse charge to help the newly recovering battery to accept charge as it enters recondition mode.

Recondition Phase continues to work the battery at a slightly higher voltage and amperage to re-activate the battery plates for improved depth of charge. Now that the battery has been eased back to life…….

Bulk charge phase can begin giving constant current to the battery up to about 80% of its capacity.

Absorption Phase begins with constant voltage being supplied while current is reduced. This occurs according to the batteries ability to accept charge up to 100%.

Check Phase is now activated to monitor the batteries ability to hold the charge properly, if not it will cycle back through the entire process for 24 hours or more until it determines the battery cannot be recovered. For revived batteries it then enters

Maintenance Phase where the battery can stay indefinitely connected to the charger. As the battery drops voltage while unused, the unit will activate when needed to ensure a full state of readiness.

Keeping your batteries properly maintained with dramatically Extend working Life.

Customer Reviews

To ensure that our reviews are real and relevent we only approve reviews that are written by our customers.

Click here to write an online review for this product.

Be the first to review this product