Tridonic 28002088 Accu NiMH C 3A 3.6v 2.2Ah Stick Battery Pack
Genuine Tridonic 28002088 Accu-NiMH C 3A replacement emergency lighting battery pack, comes with ends caps.
This battery is listed for the following Tridonic drivers:
Driver Part name Driver Article number Duration
EM powerLED 1 W BASIC 89899858 2hr / 3hr
EM powerLED 1 W BASIC 89899865 2hr / 3hr
EM powerLED 2 W BASIC 89899859 1hr
EM powerLED 2 W BASIC 89899866 1hr
EM powerLED BASIC FX 213 lp 75W 220V 89800598 1hr
EM pLED BASIC FX 102 SC MH/NiCd 32W 50V 89800688 1hr
EM powerLED PRO DIM 103 C NiCd 45W 50V 89800433 1hr
EM powerLED PRO DIM 103 SR NiCd 45W 50V 89800434 1hr
EM powerLED PRO DIM 103 SR NiMH 45W 50V 89800505 1hr
EM powerLED 1 W PRO EZ-3 89800029 2hr / 3hr
EM powerLED 1 W PRO EZ-3 89800031 2hr / 3hr
EM powerLED 2 W PRO EZ-3 89800030 1hr
EM powerLED 2 W PRO EZ-3 89800032 1hr
EM powerLED 1 W ST 89899860 2hr /3hr
EM powerLED 1 W ST 89899867 2hr /3hr
EM powerLED 2 W ST 89899861 1hr
EM powerLED 2 W ST 89899868 1hr
EM powerLED ST FX 103 C NiCd 45W 50V 89800431 1hr
EM powerLED ST FX 103 SR NiCd 45W 50V 89800432 1hr
EM powerLED 12W BASIC CLE NiMH 89800526 3hr
EM powerLED 12W BASIC CLE NiCd 89800525 3hr
EM powerLED 15W BASIC CLE NiMH 89800174 3hr
EM powerLED 15W BASIC CLE NiCd 89800176 3hr
EM powerLED NM 1W BASIC 89800111 3hr
EM powerLED NM 1W BASIC 89800112 3hr
Please note : This list is not exhaustive, this battery part may fit other drivers that are not listed above. Although care has been taken to curate the references above data may have changed or become outdated over time, Always check suitibility before purchase against existing battery fitted. If you are unsure further details and datasheets are available on the manufacturers website.
Tridonic Accu NiMh C 3A
Nickel Metal Hydride Battery
3 cells 2.2Ah 3.6v
Art. No. 28002088
Article Number : 28002088
Art. No. 28 002 088
Part : Accu-NiMH C 3A
Chemistry : Ni-Mh, Nickel Metal Hydride
Voltage : 3.6v
Capacity : 2.2Ah
Dimensions of battery pack excluding end caps :
Length (+/- 5mm): 128mm
Diameter (+/- 5mm): 23mm
Dimensions of battery pack including end caps :
Length (+/- 5mm): 166mm
Width (+/- 5mm): 28mm
Height (+/- 5mm) : 28mm
Hole Spacing (+/- 5mm): 135mm
Note: The dimensions listed above are from stock we have physically measured and may vary slightly depending on available stock, or from measurements on datasheets, always check suitability against existing battery packs before ordering.
Replacement battery pack for Tridonic Emergency Lighting / switch gear / control gear, for specific units that this is suitable for please see manufacturers website.
Product description
High-temperature NiMH cells for use with emergency lighting units
Cadmium free
Constant high-temperature operation – depending on the emergency lighting unit used (refer to respective emergency control gear data sheet)
Low profile cross-section 23 mm (without end caps)
Good charging properties at high temperature
High energy maintenance of the charged battery
Certified quality manufacturer
In various configurations
Simple connection with blade terminal
With polycarbonate fixing caps and connecting cable
Electrical connection with mounted end caps possible
Suitable for emergency lighting equipment as per IEC 60598-2-22
EAN/UPC: 9006210638782
Country of Origin: CN
Customs tariff No.: 85075000
About Ni-Cd / Ni-Mh Batteries supplied by The Battery Shop
Here at The Battery Shop we supply many replacement Emergency lighting batteries, we can supply batteries direct from manufacturers, and we have inhouse assembly facilities for our own customised battery packs, and assemble alternatives to battery packs that have been discontinued by Emergency lighting manufacturers.
All Ni-Cd batteries supplied by The Battery Shop are sold for emergency lighting use within the UK only, and are not available for purchasing inside the European Union.
Our batteries and battery packs are NOT to be used in any inflammable, hazardous or gas tight areas.
Please ensure that you are ordering the correct products, always check the battery specification (eg voltage, capacity, chemistry, battery type, connector, size etc) against your existing battery before ordering.
Once fitted batteries must be allowed a minimum of 72 hours to charge before testing.
All old Batteries /products must be disposed of as per regulations in your area please do not place in normal waste.
All trademarks, logos and brand names are the property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names,trademarks and brands does not imply endorsement.
