Tridonic 28002090 Accu NiMH C 5A 6.0v 2.2Ah Stick Battery Pack
Genuine Tridonic 28002090 Accu-NiMH C 5A replacement emergency lighting battery pack, comes with ends caps.
This battery is listed for the following Tridonic drivers:
Driver Part name Driver Article number Duration
EM powerLED 2 W BASIC 89899859 3hr
EM powerLED 2 W BASIC 89899866 3hr
EM powerLED 4W BASIC 89800121 1hr
EM powerLED 4W BASIC 89800122 1hr
EM powerLED 4W BASIC NiMH 89800444 1hr
EM powerLED BASIC FX 215 lp 75W 220V 89800600 1hr
EM powerLED 2 W PRO EZ-3 89800030 3hr
EM powerLED 2 W PRO EZ-3 89800032 3hr
EM powerLED 4W PRO EZ-3 89800126 1hr
EM powerLED 2 W ST 89899861 3hr
EM powerLED 2 W ST 89899868 3hr
EM powerLED 4W ST 89800124 1hr
EM powerLED 4W ST NiMH 89800445 1hr
Please note : This list is not exhaustive, this battery part may fit other drivers that are not listed above. Although care has been taken to curate the references above data may have changed or become outdated over time, Always check suitibility before purchase against existing battery fitted. If you are unsure further details and datasheets are available on the manufacturers website.
Tridonic Accu NiMh C 5A
Nickel Metal Hydride Battery
5 cells 2.2Ah 6.0v
Art. No. 28002090
Article Number : 28002090
Art. No. 28 002 090
Part : Accu-NiMH C 5A
Chemistry : Ni-Mh, Nickel Metal Hydride
Voltage : 6.0v
Capacity : 2.2Ah
Dimensions of battery pack excluding end caps :
Length (+/- 5mm): 212mm
Diameter (+/- 5mm): 23mm
Dimensions of battery pack including end caps :
Length (+/- 5mm): 252mm
Width (+/- 5mm): 28mm
Height (+/- 5mm) : 28mm
Hole Spacing (+/- 5mm): 220mm
Note: The dimensions listed above are from stock we have physically measured and may vary slightly depending on available stock, or from measurements on datasheets, always check suitability against existing battery packs before ordering.
Replacement battery pack for Tridonic Emergency Lighting / switch gear / control gear, for specific units that this is suitable for please see manufacturers website.
Product description
High-temperature NiMH cells for use with emergency lighting units
Cadmium free
Constant high-temperature operation – depending on the emergency lighting unit used (refer to respective emergency control gear data sheet)
Low profile cross-section 23 mm (without end caps)
Good charging properties at high temperature
High energy maintenance of the charged battery
Certified quality manufacturer
In various configurations
Simple connection with blade terminal
With polycarbonate fixing caps and connecting cable
Electrical connection with mounted end caps possible
Suitable for emergency lighting equipment as per IEC 60598-2-22
EAN/UPC: 9006210638843
Country of Origin: CN
Customs tariff No.: 85075000
About Ni-Cd / Ni-Mh Batteries supplied by The Battery Shop
Here at The Battery Shop we supply many replacement Emergency lighting batteries, we can supply batteries direct from manufacturers, and we have inhouse assembly facilities for our own customised battery packs, and assemble alternatives to battery packs that have been discontinued by Emergency lighting manufacturers.
All Ni-Cd batteries supplied by The Battery Shop are sold for emergency lighting use within the UK only, and are not available for purchasing inside the European Union.
Our batteries and battery packs are NOT to be used in any inflammable, hazardous or gas tight areas.
Please ensure that you are ordering the correct products, always check the battery specification (eg voltage, capacity, chemistry, battery type, connector, size etc) against your existing battery before ordering.
Once fitted batteries must be allowed a minimum of 72 hours to charge before testing.
All old Batteries /products must be disposed of as per regulations in your area please do not place in normal waste.
All trademarks, logos and brand names are the property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names,trademarks and brands does not imply endorsement.
